Reverse engineering
Rebuilding a part that has no drawing
We scan the original part at 0.02 mm resolution and turn it into a CAD model in STEP format. On request we then print the replacement, or you receive only the data.
From the original to a new part
Scan
A structured-light scanner captures the surface at up to 0.02 mm resolution. Large parts are scanned in several passes and merged. Shiny surfaces get a matting spray first, which can be removed without residue.
CAD model (STEP)
From the scan we build a parametric CAD model. Dimensions can be changed in it, for example to bring a worn area back to nominal size. The STEP file opens in all common CAD programs.
Printing or manufacturing
We reprint the part in FDM from PLA, ABS, PETG or TPU, SLA on request. With the STEP file you can also have the part milled or cast elsewhere.
Typical cases
- Spare part no longer availableThe manufacturer has discontinued the part or no longer exists.
- Part without a drawingThe part works, but there is neither a drawing nor CAD data.
- Broken or wornDamaged parts can be scanned too. We add the missing geometry in CAD.
- Classic cars and restorationParts you cannot buy anywhere any more.
One example is in our portfolio (German): small parts for a packaging machine for which neither original parts nor CAD data existed.
Four steps
Request
Send us a photo of the part and tell us what you need: only the data or the finished part. You get a reply within 24 hours.
Get the part to us
Drop the part off in Freiburg or send it to us. On request we scan sensitive originals while you wait.
Scan and CAD
After scanning we clean up the data and build the CAD model. On request, a colour-map comparison shows where model and original differ.
Data or part
You receive the STEP file, the reprinted part or both. The original is returned to you undamaged.
What to bring
The cost depends on the size and shape of the part and on whether you need only data or the part as well. Guide prices are on our price page (German). More on the scanning side: 3D scanning.
- The original part, even if it is broken or worn.
- If available, the mating part or the assembly the part fits into.
- Where the part sits and what it has to withstand, for example heat, oil or tensile load. We choose the material based on this.
- The quantity: a single part or a small batch.
- For confidential parts, your non-disclosure agreement. We sign it before we start.
FAQ
Common questions about reverse engineering
A scan produces a mesh of triangles (STL). You can print from it, but it is hard to design with. In reverse engineering we turn it into a CAD model with surfaces and dimensions (STEP) that you can open and edit in common CAD programs.
Yes. We scan the fragments and add the missing geometry in the CAD model. If the mating part is included, we use it to check the fit dimensions.
STEP for design work and STL for 3D printing. On request also IGES, OBJ, PLY or the raw scan data.
The scanner resolves down to 0.02 mm. The printed part holds ±0.1 to 0.3 mm in FDM and ±0.05 to 0.1 mm in SLA. If a fit needs tighter tolerances, we clarify this before the order.
We charge by effort, because parts differ a lot. You get a quote beforehand. Guide prices for scanning and printing are on our price page (German).
Send us a photo of the part
Tell us what the part is used for and whether you need data or a finished part. You get a reply within 24 hours, followed by a quote.
We reply on working days within a few hours